![]()
GRAFSOL A
Bio-degradable Graffiti Remover
PRODUCT DESCRIPTION
GRAFSOL A is water soluble product based on
biodegradable solvents and surfactants.
This product is non-flammable, caustic free and with very low toxicity.
Therefore allowing the user to work free of the discomfort and potential
hazards associated with volatile and aggressive materials such as
dichlorobenzene or methylene chloride.
GRAFSOL A is ideal for removing a variety of aerosol
paints, marker pens on masonry, painted, tiled, steel, laminated and glass
surfaces. It can also removes bill poster, label and sticky tape residues.
GRAFFITI REMOVAL
1. Apply GRAFSOL A directly to the surface undiluted
either with a cloth/brush or spray on with a trigger sprayer, allow 2-3
minutes for the product to work on the graffiti.
2. Using clean rags, remove as much softened graffiti as possible off the
wall.
3. If any graffiti is still visible, repeat steps 1 and 2.
Please Note: After removing the graffiti. You MUST pressure clean or rinse the
area thoroughly with water. This will ensure the surface is completely free of
residues.
To protect the cleaned surface against further graffiti attacks, please use
GRAFFITI MAX anti-graffiti coating. See Graffiti - Max section.
COVERAGE
One litre removes approx. 2-4 square metres depending on the
types of spray paint.
CLEAN UP
No messy clean up with solvents, simply use water to clean up
equipment.
PRODUCT SIZE
750ml with trigger sprayer
Five litre jerry can or 20 litre plastic drum.
Click
here for shipping and handling information.
